Metal Roof Leak Stop Self Adhesive Asphalt Waterproof Tape

PRODUCT NAMEMetal roof stop leak self adhesive bitumen flashing tapeSTRUCTURE1)Top layer:Silver / Colored Alum foil , HDPE film , Cross-linked film2)Mid layer:Modified bituminous layer3)Botton layer:Release liner interleaving (removed prior to use)THICKNESS  (mm) 1mm / 1.2mm / 1.3mm / 1.5mm / 1.8mm /2.0mm......WIDTH &n

Featured Products

Metal Roof Stop Leak Self Adhesive Bitumen Flashing Tape
PRODUCT NAMEMetal roof stop leak self adhesive bitumen flashing tape
STRUCTURE
1)Top layer:Silver / Colored Alum foil , HDPE film , Cross-linked film
2)Mid layer:Modified bituminous layer
3)Botton layer:Release liner interleaving (removed prior to use)
THICKNESS  (mm) 1mm / 1.2mm / 1.3mm / 1.5mm / 1.8mm /2.0mm......
WIDTH      (cm)5cm / 7.5cm / 10cm / 15cm / 20cm / 30cm......200cm
LENGTH      (m)3m / 5m / 8m / 10m ......20m (Normal:10m per roll)

Normal packing:
Normal package: 2 pieces of blank round paper / shrinked plastic film per roll,carton and packing belt outside. with or without customers'logo.Metal Roof Stop Leak Self Adhesive Bitumen Flashing Tape
USES
*weatherproof garages,toolsheds,glasshouses,outhouses
*seal leaks in caravans,cars,trucks,metal water tanks or troughs
*seal window sills,sliding doors,air vents,around chimneys and corrugated roofing sheets
*can reduce energy costs by sealing construction gaps
*repair downpipes,guttering
*seals joints between carports or "lean to" and supporting walls
Metal Roof Stop Leak Self Adhesive Bitumen Flashing Tape
Attention / Storage /Application:
STORAGEStore in a cool,dry area away from direct sunlight.
Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen.
APPLICATION*Ensure that surface is free from dirt,dust,contamination
*Remove any loose material using a scraper or wire brush
*Application:  +5  to  +45ºC
*Unwind and cut tape to required length
*peel back the release liner and apply to the surface firmly.
Ensure that no air is trapped.
*Using a small roller,ensure that all the edges and overlaps are forming proper seals and installed in a manner were they will be self draining.
*overlaps should be at least 25mm
PRIMER*Porous surfaces such as concrete or brick may be primed prior to application with a bitumen based primer.
*Always ensure volatile content of primer has evaporated before applying the flashing tape.
*Do not trap solvents between the tape and the surface being protected.
CHARACTERISTICS1)Self adhesion without torch,no pollution
2)Good rubber elasticity / elongation / self-healing
3)Stick permanently to clean surfaces
4)Can help prevent mould by sealing out moisture
Metal Roof Stop Leak Self Adhesive Bitumen Flashing Tape

Marine hatch cover tape

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours